RUOTATE IL DEVICE PER UNA VISIONE OTTIMALE
M40F
28 Giugno 2017
M41CG
28 Giugno 2017

M30F

Backpart molding machine 2 HOT stations

-hot RUBBER Pad
-pneumatic pad clamping by 2 lateral CYLINDERS
-alu-mould inclined towards operator – alu mold raise to the pad
-horizontally pivoted pincers pincers with variable pulling direction ‘’S’’
-POWERED FLANGING device with QUICK adjustments
-projectors with graduated scale and mid line

Download “M30F” M30F.pdf – Scaricato 138 volte – 2 MB

 

COD: M30F Categoria:
Descrizione

TYPES OF WORK
ANY TYPE OF UPPERS, THE MACHINE IS PARTICULARY INDICATED TO MANAGE UPPERS WITH PRECEMENTED BOARDS OR SOLVENT ACTIVATED COUNTERS.

OPERATION
THE OPERATORS LOADS AN UPPER, WITH COUNTER INSERTED, ONTO THE HEATED MOULD, PULLING PINCERS TENSION THE UPPER THEN MOULDING PHASE STARTS: THE INNER MOULD MOVES UPWARDS AND PAD CLAMPS. BY HEATING AND PRESSURE COUNTER IS ACTIVATED AND THE MATERIALS (UPPER, COUNTER AND LINING) ARE LAMINATED TOGHETER WITHOUT DEFECTS. BACKPART OF THE UPPER AT THIS POINT IS MOULDED AND THE SHAPE IS STABILIZED, HEEL MARGIN IS FLANGED. WHEN SETTLED TIME IS DWELL, THE UPPER IS RELEASED WHILE MOULDS RETURN TO START POSITION TO ALLOW UNLOADING AND NEW CYCLE.

BENEFITS

  • ELECTRONIC CONTROL WITH DIGITAL VISUALIZATION OF HEATED MOULDS TEMPERATURES.
  • CLEAR VIEW OF THE BACK SEAM DURING LOADING OF THE UPPER ONTO HEATED MOULD, THANKS TO MOULD INCLINATION TOWARDS THE OPERATOR.
  • PULLING DIRECTION CAN BE SETTLED ACCORDING TO THE TYPE OF UPPER.
  • HEATED MOULDS ARE CONSTRUCTED ACCORDING TO THE SHAPE OF CUSTOMER’S LAST.
  • THE PULLING PINCERS ARE PIVOTED TO ALLOW REGULATION OF THE GRIPPING POSITION ACCORDING TO THE MOULD CURVE.
Dati Tecnici

DIMENSIONS: CM 100 x 90 x 190 (height)

DIMENSIONS with PACKING: CM 115 x 105 x 225 (height)

WEIGHT: net Kg 400 –gross Kg 500

ELECTRICAL CONSUMPTION: KW 1.1

NOTE: TECHNICAL DATA COULD BE CHANGED WITHOUT NOTICE.

Optionals

Backpart molding machine 2 HOT stations
-hot RUBBER Pad
-pneumatic pad clamping by 2 lateral CYLINDERS
-alu-mould inclined towards operator – alu mold raise to the pad
-horizontally pivoted pincers pincers with variable pulling direction ‘’S’’
-POWERED FLANGING device with QUICK adjustments
-projectors with graduated scale and mid line