RUOTATE IL DEVICE PER UNA VISIONE OTTIMALE
M49
28 Giugno 2017
M49F
28 Giugno 2017

M33

Backpart molding machine 2 HOT +2 COLD stations
-cold RUBBER pad -hot RUBBER Pad
-pneumatic pad clamping by 2 lateral CYLINDERS
-alu-mould inclined towards operator –alu mold raise to the pad
-horizontally pivoted pincers pincers with variable pulling direction ‘’S’’
-Freezer Gas + Liquid

Download “M33” M33.pdf – Scaricato 149 volte – 2 MB

Download “M33” M33.pdf – Scaricato 149 volte – 2 MB

COD: M33 Categoria:
Descrizione

TYPES OF WORK
ANY TYPE OF UPPERS, THE MACHINE IS PARTICULARY INDICATED TO MANAGE UPPERS WITH THERMOPLASTIC OR THERMOADESIVE COATED COUNTERS.

OPERATION
THE OPERATOR LOADS AN UPPER, WITH COUNTER INSERTED, ONTO THE HEATED MOULD. THEN ACTIVATING CYCLE BEGINS: BY HEATING AND PRESSURE COUNTER IS ACTIVATED AND THE MATERIALS (UPPER, COUNTER AND LINING) ARE LAMINATED TOGHETER WITHOUT DEFECTS. WHEN ACTIVATION IS FINISHED, UPPER IS RELEASED. THE OPERATOR UNLOADS IT FROM HEATED STATION AND LOADS ONTO COOLED ONE, PULLING PINCERS TENSION THE UPPER THEN MOULDING CYCLE STARTS: THE PADS CLAMPS. BACKPART OF THE UPPER AT THIS POINT IS MOULDED AND THE SHAPE STABILIZED. WHEN SETTLED TIME IS WELL THE UPPER IS RELEASED AND MOULD RETURN TO START POSITION TO ALLOW UNLOADING AND NEW CYCLE.

BENEFITS

      • ELECTRONIC CONTROL WITH DIGITAL VISUALIZATION OF HEATED MOULDS TEMPERATURES.
      • CLEAR VIEW OF THE BACK SEAM DURING LOADING OF THE UPPER ONTO HEATED MOULD, THANKS TO MOULD INCLINATION TOWARDS THE OPERATOR.
      • ON ALL THE VERSIONS EQUIPPED WITH FLANGING SYSTEM: LIGHT BACK GAUGES WITH GRADUATED SCALE ALLOWING A PERFECT UPPER POSITIONING AND ENTERING AND A PERFECT FIXING OF FLANGED MARGIN ENTITY.
      • THE MOULDS ARE CONSTRUCTED ACCORDING TO THE SHAPE OF CUSTOMER’S LAST.
Dati Tecnici

DIMENSIONS: CM 160 x 80 x 210 (height)

DIMENSIONS with PACKING: CM 175 x 100 x 225 (height)

WEIGHT: net Kg 640 – gross Kg 830 ( case) or Kg 740 (crate)

ELECTRICAL CONSUMPTION: KW 2

NOTE: TECHNICAL DATA COULD BE CHANGED WITHOUT NOTICE.

Optionals

S pincers variable direction for 1 station
PZR pincers Widht quick adjustable for 1 station
PZH pincers Height quick adjustable and independent for 1 station
BSP pneumatic back stop plate (only for models with flanging) for 1 station
4RP two additional reactivating stations complete of alu and rubber molds and pincers
PO projector with graduated scale and mid line for 1 station
PR4 lateral preheating device for 4 alu moulds
FOT photoelectric device (only for HOT models)
GY GOODYEAR FLANGING KIT: special wiper holders, wipers, back alu-blocks and BSP pneumatic back stop plates