RUOTATE IL DEVICE PER UNA VISIONE OTTIMALE
M40
19 Aprile 2019
M41F
19 Aprile 2019

M41

Backpart molding machine 1 HOT + 1 COLD station

-cold RUBBER pad -hot RUBBER Pad
-alu-mould inclined towards operator –pad descent to alu mold
-horizontally pivoted pincers -Freezer Gas + Liquid

Download “M41” M41.pdf – Scaricato 187 volte – 676 KB

COD: M41 Categoria:
Descrizione

TYPES OF WORK
ANY TYPE OF UPPERS, THE MACHINE IS PARTICULARY INDICATED TO MANAGE UPPERS WITH PRECEMENTED BOARDS OR SOLVENT ACTIVATED COUNTERS.

OPERATION
THE OPERATOR LOADS AN UPPER, WITH COUNTER INSERTED, ONTO THE HEATED MOULD. THEN ACTIVATING CYCLE BEGINS: BY HEATING AND PRESSURE COUNTER IS ACTIVATED AND THE MATERIALS (UPPER, COUNTER AND LINING) ARE LAMINATED TOGHETER WITHOUT DEFECTS. WHEN ACTIVATION IS FINISHED, UPPER IS RELEASED. THE OPERATOR UNLOADS IT FROM HEATED STATION AND LOADS ONTO COOLED ONE, PULLING PINCERS TENSION THE UPPER THEN MOULDING CYCLE STARTS: THE PADS CLAMPS. BACKPART OF THE UPPER AT THIS POINT IS MOULDED AND THE SHAPE STABILIZED. WHEN SETTLED TIME IS WELL THE UPPER IS RELEASED AND MOULD RETURN TO START POSITION TO ALLOW UNLOADING AND NEW CYCLE.

BENEFITS

  • ELECTRONIC CONTROL WITH DIGITAL VISUALIZATION OF HEATED MOULDS TEMPERATURES.
  • CLEAR VIEW OF THE BACK SEAM DURING LOADING OF THE UPPER ONTO HEATED MOULD, THANKS TO MOULD INCLINATION TOWARDS THE OPERATOR.
  • THE PULLING PINCERS ARE PIVOTED TO ALLOW REGULATION OF THE GRIPPING POSITION ACCORDING TO THE MOULD CURVE.
  • THE HEATED MOULDS ARE CONSTRUCTED ACCORDING TO THE SHAPE OF CUSTOMER’S LAST.
  • COMPACT DIMENSION OF MACHINE, REDUCED AREA OCCUPIED IN FACTORY.

 

Dati Tecnici

DIMENSIONS: CM 105 x 80 x 205 (height)

DIMENSIONS with PACKING: CM 140 x 105 x 225 (height)

WEIGHT: net Kg 300 –gross Kg 380

ELECTRICAL CONSUMPTION: KW 2.1

NOTE: TECHNICAL DATA COULD BE CHANGED WITHOUT NOTICE

Optionals

S pincers variable direction for 1 station
PZR pincers Widht quick adjustable for 1 station
PZH pincers Height quick adjustable and independent for 1 station
PO projector with graduated scale and mid line for 1 station
PR4 lateral preheating device for 4 alu moulds
FOT photoelectric device (only for HOT models)