RUOTATE IL DEVICE PER UNA VISIONE OTTIMALE
M49 I
19 Aprile 2019
Optional R
11 Giugno 2020

M48

Backpart molding machine 2 HOT stations
-hot RUBBER Pad
-alu-mould inclined towards operator –pad descent to alu mold
-horizontally pivoted pincers

Download “M48” M48.pdf – Scaricato 171 volte – 959 KB

Descrizione

TYPES OF WORK
ANY TYPE OF UPPERS, THE MACHINE IS PARTICULARY INDICATED TO MANAGE UPPERS WITH PRECEMENTED BOARDS OR SOLVENT ACTIVATED COUNTERS.

OPERATION
THE OPERATORS LOADS AN UPPER, WITH COUNTER INSERTED, ONTO THE HEATED MOULD, PULLING PINCERS TENSION THE UPPER THEN MOULDING PHASE STARTS: THE PAD CLAMPS ON ALU-MOULD, BY HEATING AND PRESSURE COUNTER IS ACTIVATED AND THE MATERIALS (UPPER, COUNTER AND LINING) ARE LAMINATED TOGHETER WITHOUT DEFECTS. BACKPART OF THE UPPER AT THIS POINT IS MOULDED AND THE SHAPE IS STABILIZED, WIPERS MAKE THE HEEL MARGIN FLANGING INSIDE. WHEN SETTLED TIME IS DWELL, THE UPPER IS RELEASED WHILE MOULDS RETURN TO START POSITION TO ALLOW UNLOADING AND NEW CYCLE.

BENEFITS

  • ELECTRONIC CONTROL WITH DIGITAL VISUALIZATION OF HEATED MOULDS TEMPERATURES.
  • CLEAR VIEW OF THE BACK SEAM DURING LOADING OF THE UPPER ONTO HEATED MOULD, THANKS TO MOULD INCLINATION TOWARDS THE OPERATOR.
  • THE PULLING PINCERS ARE PIVOTED TO ALLOW REGULATION OF THE GRIPPING POSITION ACCORDING TO THE MOULD CURVE.
  • THE PULLING DIRECTION CAN BE SETTLED ACCORDING TO THE TYPE OF UPPER.
  • THE HEATED MOULDS ARE CONSTRUCTED ACCORDING TO THE SHAPE OF CUSTOMER’S LAST.
  • COMPACT DIMENSION OF MACHINE, REDUCED AREA OCCUPIED IN FACTORY.