M30F

Backpart moulding machine 2 HOT stations
  • Hot RUBBER Pad
  • Pneumatic pad clamping
  • Alu-mould inclined towards operator
  • Alu mould raise to the pad
  • Horizontally pivoted pincers pincers with variable pulling direction “S”
  • POWERED FLANGING device with QUICK adjustments
  • Projectors with graduated scale and mid line

Description

Any type of uppers, the machine is particulary indicated to manage uppers with precemented boards or solvent activated counters.
The operators loads an upper, with counter inserted, onto the heated mould, pulling pincers tension the upper then moulding phase starts: the inner mould moves upwards and pad clamps. By heating and pressure counter is activated and the materials (upper, counter and lining) are laminated togheter without defects. Backpart of the upper at this point is moulded and the shape is stabilized, heel margin is flanged. When settled time is dwell, the upper is released while moulds return to start position to allow unloading and new cycle.
Electronic control with digital visualization of heated moulds temperatures.

Clear view of the back seam during loading of the upper onto heated mould, thanks to mould inclination towards the operator.

Pulling direction can be settled according to the type of upper.

Heated moulds are constructed according to the shape of customer’s last.

The pulling pincers are pivoted to allow regulation of the gripping position according to the mould curve.

REQUEST INFORMATION

Fill out the form in all its parts to request information on this machine