Backpart moulding machine 2 HOT stations
  • Hot RUBBER Pad
  • Alu-mould inclined towards operator
  • Pinze trazione tomaia con regolazione rapida tiraggio


Any type of uppers, the machine is particulary indicated to manage uppers with precemented boards or solvent activated counters.
The operators loads an upper, with counter inserted, onto the heated mould, pulling pincers tension the upper then moulding phase starts: the pad clamps on alu-mould, by heating and pressure counter is activated and the materials (upper, counter and lining) are laminated togheter without defects. Backpart of the upper at this point is moulded and the shape is stabilized, wipers make the heel margin flanging inside. When settled time is dwell, the upper is released while moulds return to start position to allow unloading and new cycle.
Electronic control with digital visualization of heated moulds temperatures.

Clear view of the back seam during loading of the upper onto heated mould, thanks to mould inclination towards the operator.

The pulling pincers are pivoted to allow regulation of the gripping position according to the mould curve.

The pulling direction can be settled according to the type of upper.

The heated moulds are constructed according to the shape of customer’s last.

Compact dimension of machine, reduced area occupied in factory.


Fill out the form in all its parts to request information on this machine